12V 72Ah Battery Standard
HOW TO INSTALL THE BATTERY?
• Before removing the battery on the vehicle, check the capacity information, dimensions and polarity direction and cable markings, if necessary, put +/- signs on the cables. The negative cable must be disconnected first, then the positive cable.
• Make sure that the voltage and charge value of the new battery and the polarity are correct.
• Prepare the cable connections (cable ends should be cleaned with hot water if oxidized) and the battery tray by carefully examining them.
• Connect the Positive (+) wire first. Then connect the negative (-) ground wire. Make the mounting and pole connections of the new accumulator firmly according to the manufacturer's instructions.
• Be particularly careful when clamping the battery terminals from the side, as over-tightening will damage the terminals. Assembly should be done carefully according to the manufacturer's instructions, as loose clamping will cause explosions.
• Coat terminals and cable ends with anti-corrosion agent.
SAFETY AND ENVIRONMENTAL MEASURES
– Acid-resistant work clothes, plastic gloves, boots and goggles should be used as personal protection while connecting the battery to the charger.
- Since there will be explosive gas release during the battery charging process, ambient ventilation should be provided and fire should not be approached.
– Waste (scrap) batteries should never be thrown away, they should be delivered to battery services and dealers.
– Electrolyte (battery water) should never be used in sinks, sewers, etc. should not be spilled.
– When connecting the battery, first the positive connection cable and then the negative connection cable must be connected.
– Battery connection should be done carefully. Connection areas (pole heads) should never be left loose.
– The battery must be firmly fixed to the vehicle installed.
